Universal Polyester Underlay

SBS Modified Torch-on Underlay

Universal Polyester Underlay is a high performance, torch-applied underlay membrane which is designed to be used as part of a torch-applied built-up roofing system. It features a polyester core which is saturated and coated in bitumen, with plastic film on the lower surface and a sanded finish on the upper surface.

When incorporated in a suitably designed and installed multi-layer system, maintained in accordance with BS 8217:2005 – Reinforced bitumen membranes for roofing, Universal Polyester Underlay will provide reliable performance.

Key Features & Benefits:

• High performance

• Polyester reinforced

• Sand finished

 

Universal Polyester Underlay

Accreditations and Certifications

Product Information
Product CodeRoll LengthRoll WidthPallet Quantity
217412m1m30 rolls

Suitability

To complete a full system, Universal Polyester Underlay is fitted above the venting base sheet, or a suitable preparation layer, prior to the final waterproofing layer. When used as part of a multi-layer built up roofing system, it provides long-lasting waterproofing performance and is readily suited to various types of flat roofing projects, including new build and refurbishments, cold roofs and warm roofs using vapour control layers with insulation.

Installation Guidelines

This product should be installed in accordance with manufacturer recommendations and all relevant national standards and codes of practice, including BS 8217:2005 – the code of practice for reinforced bitumen membranes for roofing.

Maintenance and Repair

Routine inspection, cleaning and maintenance of the roof membranes should be based on the recommendation in BS 8217:2005. Should it be damaged either during construction or at a later date, then the repairs should be made using the same materials so that the performance of the built-up membranes is retained.

Standards

Manufactured in accordance with BS EN 13707:2004+A2:2009 – Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing.

Handling and Storage

The material should be stored vertically on a firm flat surface, and transported stood on end to avoid damage.

Health and Safety

Health and Safety should be observed at all times in accordance with HSE and industry guidance. Specific Risk Assessments and Method Statements should be produced by contractors where necessary to ensure Working at Heights, Fire Safety and Manual Handling rules are compliant with current law and regulations. Health and safety data sheets are available for all materials on request from Chesterfelt.

Certification

UKCA certified & CE Marked to EN 13707:2004+A2:2009.
CE Certificate Number: 0086-CPR-595938.
UKCA Certificate Number: 0086 CPR 753192.

Quality Assurance

Universal Polyester Underlay is manufactured in accordance with BS EN ISO 9001:2015 – Quality Management Systems (QMS).

Associated Products

Chesterfelt high performance torch-on cap sheets.

What’s New at Chesterfelt?