Chesterbond Green Mineral

Traditional Pour and Roll Cap Sheet Membrane

Chesterbond Green Mineral is a traditional pour and roll membrane which is used as the final waterproofing layer in conjunction with an underlay membrane such as Chesterbond Underlay. It features a rag fibre base which is saturated and coated in oxidised bitumen and is finished with light sand on the lower surface and mineral granules on the upper surface.

When incorporated in a suitably designed and installed multi-layer system, maintained in accordance with BS 8217:2005 – Reinforced bitumen membranes for roofing, Chesterbond Green Mineral will provide reliable waterproofing performance and is suitable for use on all types of non-habitable dwellings and outbuildings.

Key Features & Benefits:

• Cost-effective waterproofing
• Heavy grade
• Mineral finish
• UV protected

Accreditations and Certifications

Product Information

Product Code	Roll Length	Roll Width	Pallet Quantity
P120	10m	1m	30 rolls

Suitability

To complete a full system, Chesterbond Green Mineral can be fitted above the underlay membrane and is used as the final waterproofing layer. When used as part of a multi-layer built up roofing system, it provides reliable waterproofing protection and is suitable for use on a wide range of non-habitable buildings.

Installation Guidelines

This product should be installed in accordance with manufacturer recommendations and all relevant national standards and codes of practice, including BS 8217:2005 – the code of practice for reinforced bitumen membranes for roofing.

Maintenance and Repair

Routine inspection, cleaning and maintenance of the roof membranes should be based on the recommendation in BS 8217:2005. Should it be damaged either during construction or at later date, then the repairs should be made using the same materials so that the performance of the built-up membranes is retained.

Mineral Surface Protection

The upper surface of the membrane is protected using mineral granules, which are sourced from natural quarrying. The colours of the minerals therefore can sometimes vary depending on seam depths and extraction positions within the quarry. However, after the effects of the weathering and ageing, any variations will become less visible.

Standards

Manufactured in accordance with BS EN 13707:2004+A2:2009 – Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing.

Handling and Storage

The material should be stored vertically on a firm flat surface and transported stood on end to avoid damage.

Certification

UKCA certified & CE Marked to EN 13707:2004+A2:2009.
CE Certificate Number: 0086-CPR-595938.
UKCA Certificate Number: 0086 CPR 753192.

Health and Safety

Health and Safety should be observed at all times in accordance with HSE and industry guidance. Specific Risk Assessments and Method Statements should be produced by contractors where necessary to ensure Working at Heights, Fire Safety and Manual Handling rules are compliant with current law and regulations. Health and safety data sheets are available for all materials on request from Chesterfelt.

Quality Assurance

Chesterbond Green Mineral is manufactured in accordance with BS EN ISO 9001:2015 – Quality Management Systems (QMS).

Associated Products

Chesterbond Underlay.